Epoxy Polyester Coating Power Distribution Cabinet Wall Mounted CE Certification

JXF Stainless Steel Bending Cabinet Power Distribution Cabinet

•  mounting plate distance can move from back and forth to adjust depth.
•  the down hole have cover board ,it is easy to disassemble the front and back doors
•  The three bottom cover boards can be exchanged each other,free movement.easy to import  cable, open the hole into the line.
•  The base  is easy to assemble and disassemble(choose by your self)
•  surface preparation:degreasing, phosphating, electrophoresis primer, outdoor    waterproof cover powder.
•  Main color:RAL7032  mounting plate:orange color or galvanization.mounting plate:2.5mm.
•  According to the customers requirements,we can make different specifications.

Process characteristics and properties:

Optional configuration: non - standard imitation cabinet shell can be made outdoor type can do anti - rain shed, side board (can be discounted), computer trailing board, threshold position, door support, light, longitudinal beam, file bag;

Material: non-standard imitation cabinets cabinet, the installation plate is galvanized sheet, material thickness door plate 2.0mm, installation board 2.5mm, cabinet body is 1.5mm;

1)  the door hinge is concealed and can be opened to 130 degrees, so it is easy to install and replace.

2)  the three cover plates of the floor entry holes can be replaced with each other, freely moving to facilitate the import of cables and opening of holes.

3)  the installation plate is made of 2.5mm thickness cold plate, galvanized or spray painted.

4)  the door plate is made of polyurethane foam sealant strips for cold rolled plates, and the required protection level can be obtained. The front and rear doors can be made single or double.

5)  surface treatment: degreasing, phosphating, pickling, outdoor waterproof plastic powder.

6)  color: RAL7032 or RAL7035 and optional color.